▲	SR-HMI is different from traditional LCD, providing with 64 human-machine-interfaces. You can add HMI to
		display system information, alarming information, running state, parameter modification and function keys
		according to the actual needs. All the displaying information such as, time, input & output state, counter,timer,
		analogue and other information can be designed and edited by users according to the needs. And the
		interfaces can be added, modified and deleted easily. Also HMI can be programmed by PC.
	▲	The crystal program panel is removable, being able to be free from the machine via SR-EHC to remote program.
		And it can be set flexibly according to your demand. When it is needed, it can be installed quickly. And when it is not
		needed, it can be removed and replaced with SR-PC. SR-PC only is a decoration cover, to avoid the entrance of the
		dust and the danger of electrical shock. And it also reduces your cost greatly.
	▲	The SR-HMI provides 32 virtual keys. The function of the virtual keys is the same as that of the input port, and a soft
		start. It will display all the defined virtual keys on the panel and each virtual key as a explanation and password
		protection function.
	▲	System Interface: Displaying SUPERCAD time, I/O state and function keys.
	▲	Alarming Interface:Alarming information after having been triggered, a function key will provide a high pulse after
		being triggered, which can be used as input of logic block and function block in order to be used as a switch.
	▲	Parameters Interface:It displays the setting parameters of Counter, Timer and Analog etc
	▲	Displaying the state of the power, running and the operation state of the CPU, with less power loss and the energy-
		saving.
	▲	SR-EHC makes the SR-HMI free from the machine and makes it possible to operate SR remotely. And the
		installation is easy and convenient.