|
|
|
¡ö |
This intelligent controller, adopting function block programming, having large programming capacity, being f reely |
|
fprogrammed according to different users and different fields, can run at your desired time table and the RTC |
|
accuracy can reach second and makes your time control more accurate. And up to 128 time sessions can |
|
be set , especially suitable for time-control system. |
¡ö |
Safety password function makes your program
absolutely safe. Before writing program, password can be set. And only |
|
after entering the correct password,
can the program be modified. |
¡ö |
It is equipped with a removable, convenient and programmable LCD, providing 64 friendly human-machine interfaces, |
|
32 virtual keys, having the function to display the alarming message and parameter and to modify the parameter. |
|
When needed, it can be installed. And when not needed, it can be removed and replaced with an
ordinary front panel. |
|
Thus the cost will be greatly reduced. |
¡ö |
The input can receive not only the digital input but also the analogue input to perform the control and . transmission of |
|
fthe temperature, moisture, pressure, flow level unit and so on. |
¡ö |
It has well-featured and
compact design with 14 point input and 8 point output. Equipped with expansion module, it can |
|
be expanded into
82 I/O better ,and to MAX 122I/O.It can be connected with telephone voice module and remote control |
|
module to perform the notification and alarming function. And the connection between the host and the module can |
|
be Bridge SR-CBA or flexible
connection SR-ECBA. |
¡ö |
The machine has short-circuit protection (internal) and relay output protection (external) function, which makes your |
|
usage safer and easier. |
|
|
|
|
Power supply |
Power |
DC12V-24V |
Input parameters: |
Input No |
14(A0-A7,B0-B5) |
Digital input |
14(A0-A7,B0-B5) |
Analogue input |
8(A0-A7) |
Power range |
DC0-24V(digital)/DC0-10V(analogue) |
Input signal0 |
DC0-5V |
Input signal1 |
DC10-24V |
Output parameters: |
Output No |
8(QA0-QA7) |
Output type |
Relay output |
Output voltage |
AC0-240V/DC0-24V |
Output current |
Resistive load 10A/Inductive load 2A |
Environment temperature: |
Running temperature |
0¡æ¡«55¡æ |
Storage/shipment |
-40¡æ¡«70¡æ |
Switch frequency: |
Mechanism |
10Hz |
Resistor/light load |
2Hz |
Sensitive load |
0.5Hz |
Other parameters: |
Clock buffer memory at 25¡æ |
80h |
RTC accuracy |
Max¡À5s/day |
Protection |
IP20 |
Emission on line |
EN55011(B) |
The main frequency range |
47-63Hz |
Function block No |
128¸ö |
Program storage capacity |
64K |
Isolation intensity |
IEC1131 |
|
|
|
|